RTCU NX-900 and
RTCU MX2 turbo LTE!
before the end of this decade, we are pleased to announce two new
The new RTCU NX-900 is in the same family as
the popular RTCU AX9 turbo, but based on
the powerful NX32L architecture, it brings a long list of new features
Our undisputed bestseller, the RTCU MX2 turbo,
is now available in an LTE version making this device
future-proof and ready for tomorrow's applications.
RTCU NX-900 is the most advanced
industrial IoT Gateway product available on the market today. The device
is based on the NX32L (NX32 for Linux) architecture, which
embraces many new technologies and, at the same time, maintains full
backward compatibility, which ensures already implemented and tested
NX32 applications can execute with no changes.
The RTCU NX-900 combines the
form-factor, power, and I/O architecture from the popular
RTCU AX9 turbo
with the power and advanced NX32L features from the
RTCU NX-900 device is an
industrial-grade device that is designed from the ground up for
professional M2M / IoT applications with its strong on-board I/O
capabilities and multiple communication interfaces such as World-wide
cellular LTE, WLAN, GNSS, Bluetooth Classic / Low-Energy, Ethernet, dual
RS232, dual RS485, and 1-Wire.
RTCU NX-900 is designed to meet the ever-increasing
challenges on security, in that it offers full TLS on all major
protocols and includes a hardened protected execution environment with
dual-boot and automatic fallback and recovery.
The on-board I/O system can be
expanded almost indefinitely and completely transparently by adding
Modbus I/O modules.
- Based on the
RTCU M2M Platform.
- NX32L (NX32 for
- RTCU IDE
- Operates under
a full and highly optimized Linux
- Open and
RTCU Platform SDK.
ARM processor operating at 500 Mhz.
point and DSP instructions.
128 MByte LP-DDR
512 MByte NAND
16 MByte NOR flash
8 MB Dataflash
128 KB SRAM with
battery back-up (unlimited endurance).
with battery back-up.
with full certificate management.
TLS/SSL support for
all major TCP protocols.
World-Wide LTE Cat. 4
SIM card reader and support for eSIM.
range ISM band RF transceiver with
GNSS with GPS, GLONASS, and GALILEO.
accessories such as ID-button reader,
temperature sensors, etc.
2 x RS232 channels
and 2 x RS485 channels.
x analog inputs with 0..10 volt / 0..20
mA with 12 bit precision.
x analog outputs with 0..10 volt / 0..20
x digital inputs and 4 x high power
to 4 digital inputs can be configured as
IEC62053 31 Class A compliant.
Expandable I/O with
standard Modbus modules.
4 x bi-colour LED and 4 x position
Accelerometer with 16g scale.
Transfer, store, and
DTMF support for
Interactive Voice Response applications.
drive with up-to 512 MByte capacity.
and circular datalogger.
Power and Battery:
AC/DC power operating range from
100..260VAC / 8..36 VDC.
On-board 2 Ah Li-Ion
battery with intelligent charging.
DC-out capability for powering external
Housed in a ruggedized plastic
encapsulation with cable glands.
protected for outdoor usage.
Equipment Directive, RED 2014/53/EU.
For further information please visit the
RTCU NX-900 product
and the RTCU MX2 turbo LTE
The RTCU NX-900
and the RTCU MX2 turbo LTE can
be ordered NOW!