RTCU CX1 pro / pro-c
 

The RTCU CX1 pro/pro-c is a compact, waterproof and ruggedized telematic tracking and control platform, based on the powerful X32-architecture also found in the popular MX2i Series. In addition to a long list of standard features, the RTCU CX1 sports a state-of-the-art 66-channels SuperGPS receiver with unprecedented performance. Unique features  includes an advanced 3D-movement sensor and wireless RF transceiver.
 

The RTCU CX1 pro/pro-c product is a worthy member of a growing number of advanced telemetry/telematic products all based on the proven and powerful X32-architecture.

The RTCU CX1 pro/pro-c is specifically based on the popular RTCU MX2i series and is 100% software compatible with all other X32 based devices from Logic IO.

The unique features of the RTCU CX1 pro/pro-c includes a 3D-movement sensor supporting a range of new applications such as detailed driving behavior and even crash detection. The RTCU CX1 pro/pro-c has support for medium range wireless communication using the ISM 868 Mhz frequency band. This feature allows implementation of wireless I/O, RF-tracking and simple remote key fob applications. 
There is on-board Li-Ion battery for uninterrupted operation during power-fail.

The ISM RF antenna is on-board and internal to the device, and the unit is delivered pre-mounted with a 50 cm interface cable with power, I/O and RS232 or CAN bus signals easily accessible. For the most flexible installation the RTCU CX1 pro/pro-c is factory delivered with an external high-performance waterproof magnet GPS antenna and a small waterproof thumb-sized GSM antenna already installed. Everything necessary to install the device is therefore included in the box, so the total cost of the device deployment is effectively reduced to a minimum.

The RTCU CX1 pro/pro-c is housed in a highly ruggedized IP66 waterproof encapsulation, which allows a new spectrum of applications to be realized due to the new installation possibilities.

The RTCU CX1 pro/pro-c offers many other sophisticated features such as: Micro SD-CARD with up to 8 GB capacity and a 512 Kbyte internal flash drive with a FAT32 compatible file-system for easy sharing of files locally and remotely with a PC/Server. 

The RTCU CX1 pro/pro-c is of course fully programmable using the user-friendly Integrated Development Environment (RTCU IDE) running under Windows. In this environment  the complete application is developed, simulated and finally transferred to the unit via a standard USB port or remotely by using GPRS or CSD (Datacall).

The RTCU CX1 pro has RS232 interface with full Garmin FMI support, and the RTCU CX1 pro-c instead has a full CAN 2.0B interface. All other specifications are similar.

The RTCU CX1 pro/pro-c feature-list includes:

•  100% software compatible with all current and past RTCU units!
•  Huge memory capacity with X32 Enhanced Memory support. 
•  High performance 16g 3-axis accelerometer / movement sensor.
•  On-board medium range ISM 868 Mhz RF transceiver with antenna.
•  Micro SD-CARD reader with FAT compatible file-system and up to 8 GB capacity.
•  Internal 512 KB Flash-Drive with full FAT support.
•  2 Digital inputs, 2 Digital high-side solid state outputs and 1 analog inputs.
•  RTCU CX1 pro: Standard RS232 port.
•  RTCU CX1 pro-c: Full CAN 2.0B controller with hardware filtering
•  Dedicated high-speed USB programming port.
•  Quad Band GSM support (850/900/1800/1900 Mhz)
•  GPRS Class 10 with full GPRS Gateway Professional support
•  Supports GSM features such as SMS/PDU/CSD/GPRS.
•  Full support for FTP and SMTP (email with attachment).
•  Ultra high-sensitivity low-power 66-channels SuperGPS receiver.
•  On-board high capacity Li-Ion battery (1000 mAh)
•  Temperature sensor
•  Advanced power-management with power-down and wait-for-event modes
   Wake-up on: Digital input, Movement, Timeout, GSM-, CAN- or RS232-activity. 
•  RTCU CX1 pro: Supports the Garmin Fleet Management / Navigation Interface
   and the Mobile Data Terminal.
•  Pre-mounted with 50 cm interface cable with all signals easily available.
•  Pre-mounted with a standard small 'thumb' size GSM antenna and a very compact
   magnet GPS antenna with 1.5 meter cable.
•  Compact ruggedized IP66 classified plastic encapsulation with mounting flange.
•  E1 automotive approval.

...many other advanced features.

Please read the RTCU CX1 pro/pro-c Datasheet and Technical Manuals for the
RTCU CX1 pro here and the RTCU CX1 pro-c here.
 

•  100% software compatible with all current and past RTCU units!
•  Huge memory capacity with optional X32 Enhanced Memory support. 
•  Fast execution (24 Mhz) with optional very fast execition (48 Mhz).
•  High performance 16g 3-axis accelerometer / movement sensor.
•  Internal 512 KB Flash-Drive with full FAT support.
•  Standard 1 Digital input, optional a total of
   2 Digital inputs, 2 Digital high-side solid state outputs and 1 analog inputs.
•  Optional standard RS232 port.
•  Dedicated high-speed USB programming port.
•  Quad Band GSM support (850/900/1800/1900 Mhz)
•  GPRS Class 10 with full GPRS Gateway Professional support
•  Supports GSM features such as SMS/PDU/CSD/GPRS.
•  Full support for FTP and SMTP (email with attachment).
•  Ultra high-sensitivity low-power 66-channels SuperGPS receiver.
•  On-board Li-Ion battery (700 mAh)
•  Temperature sensor
•  Advanced power-management with power-down and wait-for-event modes
   Wake-up on: Digital input, Movement, Timeout, GSM-, CAN- or RS232-activity. 
•  Optional supports the Garmin Fleet Management / Navigation Interface
   and the Mobile Data Terminal.
•  Pre-mounted with 50 cm interface cable with all signals easily available.
•  Pre-mounted with a standard small 'thumb' size GSM antenna and a very
   compact magnet GPS antenna with 1.5 meter cable.
•  Compact ruggedized plastic encapsulation with mounting flange.
•  Optional IP-66 ingress protection.
•  E1 automotive approvals.