Logic IO Newsletter
April 28, 2013


Dear RTCU User,

Welcome to the Logic IO Newsletter!
 
The major theme of this newsletter is the introduction of a new RTCU X32 memory architecture that will enable the future evolution of new firmware functionality by offering enhanced memory and improved performance.

The RTCU V3 Memory Architecture (V3MA) bridges the X32-generation with future RTCU generations by allowing a larger common code base to be realised which ultimately offers the most powerful, feature rich and flexible platform now and in the future.

To support the RTCU V3 Memory Memory Architecture the following releases are announced:

  • RTCU X32 Firmware V3.00.

  • RTCU IDE 6.40.

  • RTCU Deployment Server V3.10.

  • RTCU Programming Tool V6.60.

  • RTCU Communication and Support Package V1.50.


For additional information on the RTCU V3 Memory Architecture please read here.

In addition to the V3MA support, the RTCU IDE and RTCU Programming Tool are now fully Microsoft Windows 8 compatible and carry a fully certified digital signature.


Please read more below...

RTCU X32 Firmware V3.00


This release for the entire X32 series introduces a major new memory architecture to support future firmware evolution.
Except for introduction of the RTCU V3 Memory Architecture, this firmware contains only minor improvements.

The full list of news:

Enhancements:

  • Support for the RTCU V3 Memory Architecture
  • Support for handling of concatenated SMS messages (larger than 140 bytes).
  • + other minor enhancements.

Bug Fixes:

  • Ethernet / WiFi connection to the RTCU Gateway could in rare cases disconnect permanently.
  • + other minor bug fixes.


In addition to the above improvements this release also includes the improvements from the X32 Firmware V2.86 released on February 25, 2013:

Enhancements:

  • Improved GPS performance on the RTCU CX1 series.
  • Support for Homematic motion sensor (HM-Sec-MDIR) using the BC-protocol.
  • Generic RF communication interface when using the BC-protocol.
  • + other minor enhancements.

Bug Fixes:

  • Spurious power-off when operating on battery at 2/6 Mhz.
  • Spurious analog readouts when operating on 2/6 Mhz.
  • ftpFileReceive could in some cases return OK with incomplete file when
    connection closed by host.
  • GPRS network recovery in certain networks with only one DNS server present did not
    work correctly.
  • File-system did not work reliable with all media when operating at 2 Mhz.
  • ICCID was not always read out on certain SIM cards.
  • + other minor bug fixes.


Please download from www.logicio.com. 

RTCU IDE 6.40

This release of the RTCU IDE includes the following enhancements:

General Enhancements:

  • Support for the RTCU V3 Memory Architecture.
  • Windows 8 compatibility with certified digital signature.
  • RTCU USB 2.00 drivers released for Windows 8 compatibility. Installed separately.
  • Unit system information dialog can now remain open when switching to other dialogs.
    •
  • + other minor improvements.  

Bugs which have been fixed in this release:

  • Gateway connection attempt failed to certain non-symbolic IP-addresses.
  • + other minor bugs.


Please download from www.logicio.com. 

RTCU Deployment Server V3.10


This release of the RTCU Deployment Server includes the following enhancements:

The major improvements include:

  • Support for the RTCU V3 Memory Architecture.
  • Installation now has a fully certified digital signature.
  • Unicode support for national characters.

Bug fixes:

  • Pressing the ESC closed the main-window.
  • Connection attempt failed to certain non-symbolic IP-addresses. 
  • + other minor bug fixes. 


Please download from www.logicio.com.

RTCU Programming Tool V6.60

The latest release of the RTCU Programming Tool V6.60 includes the following enhancements:

Enhancements:

  • Support for the RTCU V3 Memory Architecture.
  • Windows 8 compatibility with certified digital signature.
  • RTCU USB 2.00 drivers released for Windows 8 compatibility. Installed separately.
  • Uses the latest RTCU CSP V1.50.
  • + other minor enhancements.


Please download from www.logicio.com.

RTCU Communication and Support Package V1.50


This release of the RTCU Communication Support Package V1.50 includes the following enhancements:

Enhancements:

  • Support for the RTCU V3 Memory Architecture as introduced in
    X32 firmware V3.00.
  • Package now has a certified digital signature.
  • + other minor enhancements.

The RTCU CSP V1.50 is used in the new RTCU IDE V6.40.


Please download from www.logicio.com.

For further questions or enquiries:





Logic IO ApS
Holmboes Allé 14
8700 Horsens
Denmark
Telephone: +45 7625 0210
Fax: +45 7625 0211
info@logicio.com
www.logicio.com

If you want to be removed from our mailing list, then please send an email with your
email address included to admin@logicio.com