Home Contact us


Up

RTCU PROG

 

RTCU Programming Tool  V7.30
Released: February 28, 2016


General Enhancements:

  •  Support projects compiled with Large String Support (LSS).
  •  Support for the new RTCU DX4i pro mk2.
  •  Uses the latest RTCU CSP V2.40.
  •  + other minor enhancements.

 

 

RTCU Programming Tool  V7.20
Released: September 20, 2015


The complete list is as follows:

General Enhancements:

  •  Full support for the new RTCU AX9 turbo and AX9 encore.
  •  New feature to se the GSM PIN code in the device.
  •  LPS (Large Packet Support) when using the RTCU Gateway.
  •  Uses the latest RTCU CSP V2.30
  •  + other minor enhancements.

 

RTCU Programming Tool  V7.10
Released: September 29, 2014.


The complete list is as follows:

General Enhancements:

 

 

RTCU Programming Tool  V7.00
Released: June 23, 2014.


This major release supports the NX32 Execution Architecture as used by the new RTCU MX2 turbo.
The complete list is as follows:

General Enhancements:



 

RTCU Programming Tool  V6.60
Released: April 28, 2013.


The latest release of the RTCU Programming Tool V6.60 includes the following enhancements:

Enhancements:

  •  Support for the RTCU V3 Memory Architecture as introduced in X32 firmware V3.00.
  •  Windows 8 compatibility with certified digital signature.
  •  RTCU USB 2.00 drivers released for Windows 8 compatibility. Must be installed separately.
  •  Uses the latest RTCU CSP V1.50.
  •  + other minor enhancements.

 

RTCU Programming Tool  V6.50
Released: November 24, 2012.


The latest release of the RTCU Programming Tool V6.50 includes the following enhancements:

Enhancements:

  •  Support for the SX1 series.
  •  On-demand option support.
  •  Improved communication error handling.
  •  Uses the latest RTCU CSP V1.44.
  •  + other minor enhancements.

 

 

RTCU Programming Tool  V6.40
Released: December 14, 2011.


The latest release of the RTCU Programming Tool V6.40 includes the following enhancements:

Enhancements:

  •  Support for the new CX1 series including option key activation.
  •  Uses the latest RTCU CSP V1.40.
  •  + other minor enhancements.

 

RTCU Programming Tool  V6.31
Released: September 27, 2010.


The latest release of the RTCU Programming Tool V6.31 includes the following enhancements:

Enhancements:

  •  Improved file-selection filter when choosing firmware/application.
  •  Logon sequence changed to allow a 'clear password' key to be applied.
  •  Infrequently 'incompatible instruction set' message fixed.
  •  Uses the latest RTCU CSP V1.32.
  •  + other minor enhancements.

 

 

RTCU Programming Tool  V6.30
Released: May 24, 2010.


The latest release of the RTCU Programming Tool V6.30 includes the following enhancements:

Enhancements:

  •  Support for the new RTCU AX9 Series!
  •  RTCU AX9 Series USB programming port support.
  •  Memory vector increased from 1024 to 4096 elements as found in X32 firmware V2.10.
  •  Enhanced bandwidth over CSD when using a GSM modem.
  •  Certain RS232 ports not found on some PC-installations.
  •  Uses the latest RTCU CSP V1.30.