Maintenance: Factory reset

This will restore the device back to the factory default settings.

The factory default setting are:
 

•The persistent FLASH (except for the extended flash) memory is cleared.

•The persistent FRAM memory is cleared.

•The data logger is cleared.

•The TCP/IP settings are cleared.

•The RTCU Communication Hub settings are cleared.

•Battery operation is disabled.

•Debug and network log to file is disabled.

•The internal flash drive is formatted.

•The time in the device is set to the PC time.

The application present in the device will not be changed.

Please note that this can be a lengthy operation that can take up to 5 minutes to complete.