Tutorial

Top Previous Next

This tutorial is a quick crash course in the use of the RTCU IDE and the RTCU Emulator. This tutorial presents a step-by-step guide that will teach you how to create your very first program - from programming, building and all the way to configuring and transferring your program to an RTCU device. If you do not have access to an RTCU device, do not panic, as the RTCU Emulator will show you all aspects of the RTCU, although everything will happen on your screen and not in the "real world". This tutorial also assumes that you have installed the RTCU IDE and RTCU Emulator programs, and that all settings in the program are the same as when it was first installed.

The RTCU IDE and RTUC Emulator programs can be downloaded for free here: www.logicio.com

So, lets get started with the exciting world of programming the RTCU...

Chapter 1	The problem we want to solve
Chapter 2	Create a project
Chapter 3	Create the program file
Chapter 4	Write the program
Chapter 5	Build the project
Chapter 6	Configure the project
Chapter 7	Run the project in the RTCU Emulator
Chapter 8	Upload the project to an RTCU device
Chapter 9	Where to go from here?

Should you encounter any difficulties during the tutorial, please contact support.